This is an old revision of the document!
Model Diagnostic Tools
This page links to tools used for the NorESM model evaluation.
NorESM Diagnostic Packages
Output from the latest NCAR diagnostic pages can be found on nird here:
via the web: http://ns2345k.web.sigma2.no/noresm_diagnostics/
via the filesystem on nird here: /projects/NS2345K/www/noresm_diagnostics/
The diagnostics packages are currently available on NIRD. Each package can be run/configured from the command line using the program diag_run:
------------------------------------------------- Program: /projects/NS2345K/noresm_diagnostics/bin/diag_run Version: 4.0 ------------------------------------------------- Short description: diag_run is used to configure and run the NorESM diagnostic packages. Basic usage: diag_run -m [model] -c [test case name] -s [test case start yr] -e [test case end yr] # Run model-obs diagnostics diag_run -m [model] -c [test case name] -s [test case start yr] -e [test case end yr] -c2 [cntl case name] -s2 [cntl case start yr] -e2 [cntl case end yr] # Run model1-model2 diagnostics nohup /projects/NS2345K/noresm_diagnostics/bin/diag_run -m [model] -c [test case name] -s [test case start yr] -e [test case end yr] &> out & # Run model-obs diagnostics in the background with nohup Command-line options: -m, --model=MODEL Specify the diagnostics package (REQUIRED). Valid arguments: cam : atmospheric package (AMWG) clm : land package (LMWG) cice : sea-ice package micom : ocean package hamocc : geo-bio-chemistry package all : configure all available packages. -c, -c1, --case=CASE1, --case1=CASE1 Test case simulation (OPTIONAL). -s, -s1, --start_yr=SYR1, --start_yr1=SYR1 Start year of test case climatology (OPTIONAL). -e, -e1, --end_yr=EYR1, --end_yr1=EYR1 End year of test case climatology (OPTIONAL). -c2, --case2=CASE2 Control case simulation (OPTIONAL). -s2, --start_yr2=SYR2 Start year of control case climatology (OPTIONAL). -e2, --end_yr2=EYR2 End year of control case climatology (OPTIONAL). -i, -i1, --input-dir=DIR, --input-dir1=DIR Specify the directory where the test case history files are located (OPTIONAL). Default is --input-dir=/projects/NS2345K/noresm/cases -i2, --input-dir2=DIR Specify the directory where the control case history files are located (OPTIONAL). Default is --input-dir=/projects/NS2345K/noresm/cases -o, --output-dir=DIR Specify the directory where the package(s) the climatology and time-series files should be stored (OPTIONAL). Default is --output-dir=/projects/NS2345K/noresm_diagnostics/out/johiak -p, --passive-mode Run the script in passive mode: the diagnostic script will be configured but not executed (OPTIONAL). -t, --type=TYPE Specify climatology or time series diagnostics (OPTIONAL): valid options are --type=climo and --type=time_series. Default is to run both. Note that the time series are computed over the entire simulation. -w, --web-dir=DIR Specify the directory where the html should be published (OPTIONAL). Default is --web-dir=/projects/NS2345K/www/noresm_diagnostics Examples: diag_run -m all -c N1850_f19_tn11_exp1 -s 21 -e 50 # model-obs diagnostics of N1850_f19_tn11_exp1 for all (available) components. diag_run -m cam -c N1850_f19_tn11_exp1 -s 21 -e 50 -w /path/to/my/html # model-obs diagnostics for CAM, publish the html in /path/to/my/html. diag_run -m micom -c N1850_f19_tn11_exp1 -s 21 -e 50 # model-obs diagnostics for MICOM diag_run -m cice -c N1850_f19_tn11_exp1 -s 21 -e 50 -p # configure (but do not run) model-obs diagnostics for CICE. diag_run -m clm -c N1850_f19_tn11_exp1 -s 21 -e 50 -i /input/directory1 -c2 N1850_f19_tn11_exp2 -s2 21 -e2 50 -i2 /input/directory2 # model1-model2 diagnostics for CLM with user-specified history file directories diag_run -m clm -c N1850_f19_tn11_exp1 -s 21 -e 50 -t climo # model-obs climatology diagnostics (no time series) for CLM: diag_run -m cam -o /my/dir # install CAM diagnostics in /my/dir with minimal configuration. diag_run -m micom,hamocc -c N1850OC_f19_tn11_exp1 -s 21 -e 50 # model-obs diagnostics for micom and hamocc.
A complete technical summary of diag_run (pdf): diag_run_documentation.pdf
Report any problems, comments or suggestions to Johan Liakka: johan.liakka@nersc.no
Recent updates
- 09.04.18. Update to v4.0: included the HAMOCC diagnostics package.
- 23.02.18. Update to v3.1: added monthly MLD, seasonal SST/SSS and annual meridional heat/salinity fluxes to the MICOM diagnostics.
- 17.01.18. Update to v3.0: the first version of MICOM diagnostics has been included.
- 28.11.17. Update to v2.0: included a set of time series plots in CAM diagnostics, along with an html interface, which can be accessed from the index page (sets.htm).
Using diag_run with cron
If you want to use diag_run with crontab, you first need to load $HOME/.bash_profile, i.e.:
#--------------------------------------- # Min Hour Day Month Weekday Command(s) #--------------------------------------- 50 09 23 11 * . $HOME/.bash_profile; /projects/NS2345K/noresm_diagnostics/bin/diag_run -m cam,cice -c N18_f19_tn11_080617 -s 21 -e 50 -o /scratch/johiak/noresm_diagnostics2 -w \ /projects/NS2345K/www/test -t time_series >& /scratch/johiak/cron_out
Other tips
It is useful to add diag_run as an alias in $HOME/.bashrc, so that you do not need to write out the whole path every time you run it:
alias diag_run='/projects/NS2345K/noresm_diagnostics/bin/diag_run'
NorESM diagnostics on GitHub
The NorESM diagnostics packages and diag_run are included in the Git version control repository: https://github.com/johiak/NoresmDiagnostics
Aerosol and Chemistry, Clouds and Forcing Diagnostics
In both the default CAM5-aerosol packages (MAM3,MAM7) and the Oslo-aerosol packages, the budget terms can be taken out using a variable in the namelist :
Configuring a run with more aerosol diagnostics in (NorESM2)
&phys_ctl_nl history_aerosol = .true. /
Two more diagnostics are useful:
- Enable estimates multiple calls to radiation which are necessary for effective radiative forcing estimates
- Enable diagnostics for AEROCOM
To enable this, take the file cam/src/physics/cam_oslo$ vim preprocessorDefinitions.h and copy it to your SourceMods/src.cam folder
Change both preprocessor definitions to true
#define AEROCOM #define AEROFFL
The AEROCOM-token turns on diagnostics needed for AEROCOM The AEROFFL-token tells the model to do additional radiation-diagnostics for aerosol indirect effect
Tracer Budget terms
Fields produced in monthly average files when running with budgets activated
Running with budgets activated will produce the following terms in the monthly output files:
Output variable name | Meaning | Comment |
---|---|---|
SF{Tracer} | Emissions from surface | |
GS_{Tracer} | gas phase chemistry | 3D-emissions and gas phase washout included in this term |
AQ_{Tracer} | aquous chemistry | |
{Tracer}_Mixnuc1 | Activation in clouds and evaporation of cloud droplets | |
{Tracer}_DDF | Dry deposition flux (aerosol tracers) | |
{Tracer}_SFWET | Wet deposition flux (aerosol tracers) | |
{Tracer}_condtend | loss/production in condensation/nuclation | (CAM-Oslo only) |
{Tracer}_coagTend | loss/production in coagulation | (CAM-Oslo only) |
DF_{Tracer} | dry deposition flux (gas tracers) | output with history_aerosol with CAM-Oslo only |
WD_A_{Tracer} | wet deposititon flux (gas tracers) | output with history_aerosol with CAM-Oslo only |
{Tracer}_CLXF | 3D-emissions (“external forcing”) | output with history_aerosol with CAM-Oslo only |
{Tracer}_clcoagTend | loss of tracer due to coagulation with cloud droplets | output with history_aerosol with CAM-Oslo only |
Note: Since 3D-emissions and and gas washout rates are included in the term GS_{Tracer} in the mozart chemistry solver, the individual terms can be found like this (example for SO2):
ncap2 -O -s GS_ONLY_SO2=GS_SO2-WD_A_SO2-SO2_CLXF infile.nc outfile.nc
More info on SO2 budgets (see /models/atm/cam/tools/diagnostics/ncl/ModIvsModII/ for scripts with info on all tracers):
GS_SO2 contains the SO2 budget terms for all that goes on in the chemistry-routine, which is
1) Gas phase chemistry, 2) Wet deposition, and 3) 3D-emissions.
Gas phase chemistry is both production from DMS (GS_DMS) and loss through OH (GL_OH)
For calculations of net loss, e.g. used to calculate SO2 life-times, we're interested in the
loss through OH from the chemistry-term (GL_OH).
GS_SO2 = GL_OH + SO2_CLXF - WD_A_SO2 - GS_DMS*64/62
or
GL_OH = GS_SO2 - SO2_CLXF + WD_A_SO2 + GS_DMS*64/62
Estimating chemical loss w.r.t. S (instead of SO2 or DMS), for comparison with CAM4-Oslo numbers:
net chemial loss gas phase = (GS_SO2/1.998 - SO2_CLXF + WD_A_SO2)/1.998 + GS_DMS/1.938
net chemical loss = net chemial loss gas phase + AQ_SO2/1.998
Finally, total net loss (used to calculate life-time = -load/(net loss), where load = cb_SO2/1.998):
net loss =
- WD_A_SO2/1.998 ;wet deposition in kg/m2/sec (positive in output file)
- DF_SO2/1.998 ;dry deposition in kg/m2/sec (positive in output file)
+ AQ_SO2/1.998 ;wet phase production of SO4 in kg/m2/ses (negative in output file)
+ (GS_SO2 - SO2_CLXF + WD_A_SO2)/1.998 + GS_DMS/1.938 ; net chemical loss gas phase
Looking at the aerosol budgets (CAM-Oslo only)
- Go to the directory models/atm/cam/tools/diagnostics/ncl/budgets
- Change the filename to use in the file budgets.ncl (“myFileName” around line 18). Should be for example yearly average of month-avg file in a run with budgets
- Run the script budgets.sh to create a pdf-file (output.pdf)
NCL Model Version Comparison package (Alf K)
Making ncl plots of often used aerosol and cloud fields, including ERFs, for two model versions (CAM-Oslo only)
- Make a local copy (on Linux) of the directory models/atm/cam/tools/diagnostics/ncl/ModIvsModII
- Assuming that you have produced output data from 4 simulations: two different model versions, each with PD and PI emissions, and all run with #define AEROCOM & AEROFFL:
- In ModIvsModII.csh (note: read the header info):
- - edit model info for the first model (shown to the left in the plots): modelI = CAM4-Oslo or modelI = CAM5-Oslo ?
- - provide paths and partial file names of the model data (PD and PI) for Model I (CAM4-Oslo or CAM5-Oslo) and Model II (must be CAM5-Oslo)
- - choose desired plot format (plotf=ps, eps, pdf or png)
- Run the script: ./ModIvsModII.csh
- Furthermore, to display the plots in an organized form by use of a web browser (only possible if the chosen plot format is png):
- - download htm template files from ftp://ftp.met.no/projects/noresmatm/upload/NorESM2Diagnostics/ModIvsModII/htm-templates/
- - edit general model info (only) in ModIvsModII.htm, and manually cut and paste the mass budget numbers from the script output into this file
- - copy all png (plots) and htm files to the desired output (common) directory
- - open ModIvsModII.htm in your browser: hyper-links to all other htm files, including plots, are found here
Cloud water mass and number analysis (budgets)
Configuring a run with more cloud diagnostics in NorESM2
To switch on extra output for cloud diagnostics (mass and number tendencies for liquid water and mass) change the following namelist variable:
&phys_ctl_nl history_budget = .true. /
A python script for plotting the mass and number budgets for the cloud microphysics can be found under:
models/atm/cam/tools/diagnostics/ncl/cloudBudgets
in the same branch. Copy the script to your local computer or lustre and edit the script to read the correct input file(s) (instructions inside the script). Run the script by typing:
python scriptname.py
in your terminal.
Automatic AEROCOM analysis
To prepare output so that it is processed automatically by the aerocom tools, use the script located at models/atm/cam/tools/aerocom/ in the svn repository. The script prepares files such that the idl aerocom tools prepare plots for the aerocom webinterface: URL link to NorESM on AeroCom webinterface
The script requires <ModelName>_<ExperimentName> and <Period> as input.
<Period>: for a climatological average and run choose 9999 , for nudged simulations choose the year of the meteorology
<ModelName>_<ExperimentName>: is the dataset identifier under which the plots appear on the AeroCom webinterface
in the required format
NorESM-CAM5_svn{RevisionNumber}_YYMMDD{initials}_Freetext.
Example:
“NorESM-CAM5_svn1094_151201AG_CMIP6endelig”
Initials AG: Alf Grini, AK: Alf Kirkevåg, DO: Dirk Olivie…
Where the date YYMMDD corresponds to the time when the AeroCom data preparation script has been executed.
The script creates files named like
“aerocom3_<ModelName>_<ExperimentName>_<VariableName>_<VerticalCoordinateType>_<Period>_<Frequency>.nc”
<ModelName> ⇒ eg NorESM-CAM53
<ExperimentName> ⇒ svn{RevisionNumber}_YYMMDD{initials}_Freetext
<VariableName> ⇒ aerocom variable names
<VerticalCoordinateType> ⇒ “Surface”, “Column”, “ModelLevel”, “SurfaceAtStations”, “ModelLevelAtStations”
<Period> ⇒ eg “2008”, “2010”, “9999”
<Frequency> ⇒ “timeinvariant”,”hourly”, “daily”, “monthly”, “sat1000”, “sat1330”, “sat2200”, “sat0130”
Note that VerticalCoordinateType is dependent on the variable!! It is not a question about “vertical coordinate type used in model simulations”!
The script copies files on norstore into /projects/NS2345K/CAM-Oslo/DO_AEROCOM/<ModelName>_<ExperimentName>/renamed/