Show pageOld revisionsBacklinksODT exportBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. ====== Frequently Asked Questions ====== ===== Does fimex use file-locks for reading/writing? ===== It is very common, that NWP (numerical weather prediction) files are updated while the model is running. It is often desirable to be able to read the file already when the model is still running, e.g. to see the first few ours of weather prediction. * Fimex does not use file-locks for reading: Graphical interfaces like [[http://diana.met.no|diana]] which read via Fimex might keep the file open as long as it does not change, therefor locking the file for too long to allow writers to update the files. Writing additional data to an existing file is usually not a problem, in particularly when the reader re-opens the file when it has updated the time-stamp ''mtime''. * Fimex does not implement file-locking for writers generally, though in particularly with the [[http://fimex.met.no/doc/fillWriterDoc.html|fillWriter]] interface this situation might change, in particular for netcdf-files ===== How can I change the units of a variable? ===== If the original variable e.g. ''t2m'' has units-attribute Celsius and you want to have a new netcdf-file with unit Kelvin, you should use the ''--output.config=cdmWriterConfig.xml'' and define there the new units for the that variable and make sure you defined the datatype of that variable, too. If the input-file has the wrong units, e.g. Celsius while the data in fact is Kelvin, you should use the input.config=... and re-define the units-attribute. The data-values won't be changed. ===== How to solve problems with a short variable? ===== I have problems with a felt-file with a variable of type 'short'. fimex abborts with<code>change in scaling-factor for parameter: 31,2,1000 consider using float or double datatpye</code> What should I do? - While the netcdf-format allows for only 1 scaling-factor per variable, the felt-format can have a scaling-factor per 2d-slice per variable (that are level*time scaling-factors). You should change the //type// of the variable and its //_FillValue// attribute from //short// to //float// in the file felt2nc_variables.xml. - If you want to save disk-space, and you know that all data of the variable can be subscribed sufficiently with a packed short data-array, use the ncml-configuration as follows: <code> <?xml version="1.0" encoding="UTF-8"?> <netcdf xmlns="http://www.unidata.ucar.edu/namespaces/netcdf/ncml-2.2" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.unidata.ucar.edu/namespaces/netcdf/ncml-2.2 ncml-2.2.xsd "> <!-- change the type of a variable, repack --> <variable name="precipitation_amount" type="short"> <attribute name="_FillValue" value="-32767" type="short" /> <attribute name="scale_factor" value="0.1" type="float" /> <attribute name="add_offset" value="0" type="double" /> </variable> </netcdf> </code> In this example, the precipitation will be described with an accuracy of 0.1mm and up to 3276.7mm. The ncml-configfile will be applied right before writing with the ''--ncml.config=....ncml'' fimex-option. ===== Vector-rotation ===== ==== Which vectors are auto-detected for rotation ==== Vectors are autorotated if one of the following applies: * the ''<spatial_vector direction="x" counterpart="y_wind" />'' property is set for both vectors, this can be done with ncml, or the different reader-configurations * the vector has a known CF-standard-name, e.g. * x_wind, y_wind * *_x_velocity,*_y_velocity * *_x_transport,*_y_transport * *_x_displacement,*_y_displacement * *_eastward_*, *_northward_* * the complete list can be found in the sources after ''enhanceVectorProperties'': https://svn.met.no/viewvc/fimex/trunk/src/coordSys/CF1_xCoordSysBuilder.cc?view=markup ==== Vector-rotation gives error-message (>= 0.48) and wrong values due to different units ==== When rotating vectors for spatial interpolations, fimex does not change the scale_factor, add_offset or unit of the vector-components, but requires, that those are equal for both x and y component of the vector. This happens in particular when retrieving wind-data from ECMWF in netcdf, e.g. for ERA data. A solution is to configure the vector to have the same scale/add_offset, e.g. with ncml (--input.config): <code> <variable orgName="Uvind" name="x_wind" type="float"> <attribute name="scale_factor" value="1" type="float" /> <attribute name="add_offset" value="0" type="float" /> <remove name="_FillValue" type="attribute" /> <attribute name="standard_name" value="x_wind" type="String" /> </variable> <variable orgName="Vvind" name="y_wind" type="float" > <attribute name="scale_factor" value="1" type="float" /> <attribute name="add_offset" value="0" type="float" /> <remove name="_FillValue" type="attribute" /> <attribute name="standard_name" value="y_wind" type="String" /> </variable> </code> ===== What does this error-message mean? ===== ==== CDMException: Felt_File_Error: FeltError: cannot read gridParameters: no Felt_Array2 available ==== The config-file for felt-files must at least define 1 existing parameter in the corresponding felt-file. Update your config-file (e.g. felt2nc_variables.xml) with the output from the felt-index, which can be read by felt-tools like ''rfinh''. ==== CDMException: Can't open HDF5 attribute ==== This error-message is unfortuneatly very misleading. In many cases, the ''_FillValue'' type does not correspond to the variables type. Please check your config-file. Unless really required, it's recommended to remove the ''_FillValue''. ===== How can I read grib-message which are split over several files? ===== since fimex 0.40.1, it is possible to give multiple optional file-sources: <code> fimex --input.file=/opdata/lameps/mle/eceps_201211260000_ens00.mars \ --input.type=grb --input.config=/home/heikok/Programme/MetSis/Fimex/share/etc/cdmGribReaderConfig.xml \ --input.optional=/opdata/lameps/mle/eceps_201211260000_ens01.mars \ --input.optional=/opdata/lameps/mle/eceps_201211260000_ens02.mars \ --output.file=eceps.nc4 </code> ===== How to use fimex as opendap-client? ===== ==== Install netcdf with integrated dap-support ==== === Prerequisites === * netcdf4 (4.1.1) from unidata * curl library: ''sudo apt-get install libcurl4-gnutls-dev'' (on ubuntu hardy) * make sure to remove the libnetcdf4-dev package (on ubuntu hardy): ''apt-get remove libnetcdf4-dev'' === Build === Configuring, without HDF-file support (can be added if desired). Important: include dap-support via curl; build shared libraries (libtool autodetect dependencies) <code> ./configure --prefix=/usr/local/netcdf4.1.1 --enable-dap --with-curl-config=/usr/bin/curl-config --enable-shared --disable-static make -k # there might be errors building the man-pages depending on tex-installation make check make -k install </code> ==== Fimex and OpENDAP ==== === Build === <code> ./configure --with-netcdf=/usr/local/netcdf4.1.1 </code> === Running an extraction from opendap === <code> fimex --input.file=http://thredds.met.no/thredds/dodsC/topaz/dataset-topaz3-arc-myocean-be \ --input.type=netcdf \ --output.type=netcdf \ --output.file=test.nc \ \ --extract.selectVariables=time \ --extract.selectVariables=x \ --extract.selectVariables=y \ --extract.selectVariables=depth \ --extract.selectVariables=longitude \ --extract.selectVariables=latitude \ --extract.selectVariables=temperature \ \ --extract.reduceTime.start=2010-10-05 \ --extract.reduceTime.end=2010-10-07 \ \ --extract.reduceToBoundingBox.south 55.0 \ --extract.reduceToBoundingBox.north 80.0 \ --extract.reduceToBoundingBox.east 20.0 \ --extract.reduceToBoundingBox.west -5.0 </code> === OpENDAP and slicing === OpENDAP servers are often limited on how much data can be read at per request, e.g. thredds allows only 500MB binary data / 50MB ascii data per request before failing with an error like <code> syntax error, unexpected WORD_STRING, expecting WORD_WORD context: Error { code = 403; message = "Request too big=19011.0 Mbytes, max=500.0"^;}; terminate called after throwing an instance of 'MetNoFimex::CDMException' what(): CDMException: NetCDF: Malformed or inaccessible DAP DATADDS Aborted </code> Fimex tries to subdevide requests into one unlimited slice per variable. Unfortunately, OpENDAP often does not know about 'unlimited' dimension and one has to add that manually to fimex, e.g. for an unlimited time dimension: ''--input.config=unlimitedTime.ncml'' with contents like: <code> <?xml version="1.0" encoding="UTF-8"?> <netcdf xmlns="http://www.unidata.ucar.edu/namespaces/netcdf/ncml-2.2" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.unidata.ucar.edu/namespaces/netcdf/ncml-2.2 http://www.unidata.ucar.edu/schemas/netcdf/ncml-2.2.xsd"> <dimension name="time" isUnlimited="true" /> </netcdf> </code> ==== Authentication ==== In theory, it should be possible to specify username and password - in ''$HOME/.dodsrc'' and ''$HOME/.netrc'' (see below for an example) - as part of the URL for example ''https://XXXX:YYYY@thredds.met.no/thredds/dodsC/....nc'' Example ''$HOME/.netrc'': <code> machine thredds.met.no login XXXX password YYYY </code> Example ''$HOME/.dodsrc'' (replace ''YOURHOME'' with the value og ''$HOME''): <code> HTTP.NETRC=YOURHOME/.netrc HTTP.CREDENTIALS.USERNAME=XXXX HTTP.CREDENTIALS.PASSWORD=YYYY HTTP.USERNAME=XXXX HTTP.PASSWORD=YYYY </code> Unfortunately, this does not always seem to work as expected. Known status of OpenDAP authentication support (applies to ''fimex'' and ''ncdump''): * Specifying the password in the URL does not seem to work when the password contains a ''/'', at least for Ubuntu 18.04. * For Ubuntu 16.04 (xenial, EOL), both URL and netrc seem to work. * For Ubuntu 18.04 (bionic), username and password cannot be read from netrc, but can be specified in the URL. * For Ubuntu 20.04 (focal), username and password can only be read from netrc, but cannot be specified in the URL. * For Ubuntu 22.04 (jammy), the only solution known to us is to add a ''.dodsrc'' file in the working directory of the fimex/ncdump process fimex/faq.txt Last modified: 2024-07-03 07:11:55by alexanderb