Differences

This shows you the differences between two versions of the page.

--- emep:emep_met_files [2010-01-28 09:55:49]
annac
+++ — (current)
@@ Line 1: / Line 1: @@
-====== Meteorological input files ======
-Currently all meteorological input files are available on stallo. The input files are processed from different NWP models: Parlam-PS (old Hirlam version), Hirlam20 (Hirlam version 7.1.3), IFS, Hirham (Hirlam version) and are available on NetCDF format.
-===== Hirlam =====
-The EMEP-H20 dataset is made of Hirlam version 7.1.3 runs on extended EMEP area covering EECCA countries (370x380 gridboxes) with rotated spherical coordinates (0.2^o×0.2^o~20x20km²) on 40 eta levels interpolated to polarstereographic coordinates (50x50km² or 25x25km²) on 20 vertical sigma levels. A EMEP-H10 dataset (only for 2006!) is also made of Hirlam version 7.1.3 on a reduced EMEP area (covering central Europe)(500x500 gridboxes) with rotated spherical coordinates (0.1^ox0.1^o~10x10km²) on 40 eta levels interpolated to polarstereographic coordinates (10x10km²) on 20 vertical sigma levels.
-Basic parameters 2D:
-^ Parameter Name ^ Unit ^ Validity  ^ Comment ^
-| surface_pressure | Pa | Inst | |
-| PS | Pa | Inst | Same as above!|
-| temperature_2m | K | Inst | |
-| surface_flux_sensible_heat | J/m² | Accum | |
-| surface_flux_latent_heat | J/m² | Accum | |
-| surface_stress | Pa s | Accum | |
-| snow_depth | m | Inst | |
-| sea_surface_temperature | K | Inst | |
-| fraction_of_ice | % | Inst | |
-Extra parameters 2D: (possible to retrieve for all 50/25 km years!)
-^ Parameter Name ^ Unit ^ Validity  ^ Comment ^
-| relative_humidity_2m | % | Inst | |
-| u10 | m/s | Inst | |
-| v10 | m/s | Inst | |
-Basic parameters 3D:
-^ Parameter Name ^ Unit ^ Validity  ^ Comment ^
-| u_wind | m/s | Inst | staggered |
-| v_wind | m/s | Inst | staggered |
-| specific_humidity | [0,100] | Inst | |
-| potential_temperature | K | Inst | |
-| sigma_dot | 1/s | Inst | |
-| cloudwater | kg/kg | Inst | |
-| precipitation | mm | Accum | |
-| 3D_cloudcover | % | Inst | |
-Extra parameters 3D: (not possible to retrieve for other years!)
-^ Parameter Name ^ Unit ^ Validity  ^ Comment ^
-| convective_updraft_flux | kg/m²s | Accum | |
-| convective_updraft_detrainment | m/s | Inst | |
-| convective_downdraft_flux | kg/m²s | Accum | |
-| convective_downdraft_detrainment | m/s | Inst | |
-| convective_3D_precipitation | mm | Accum | |
-| eddy_diffusion_coefficient | m²/s | Inst | |
-==== EECCA 50 ====
-x159 gridsquares
-<code bash>
-/global/work/mifapw/emep/Data/EECCA/metdata_H20/
-</code>
-  * 2006/ : Basic parameters
-  * 2006_conv/ : Basic parameters + Extra parameters: u10, v10, relative_humidity_2m, convective_up/downdraft_flux/detrainment
-  * 2007/ : Basic parameters
-  * 2008/ : Basic parameters + Extra parameters: u10, v10, relative_humidity_2m, convective_up/downdraft_flux/detrainment, convective_3D_precipitation, eddy_diffusion_coefficient
-==== EECCA 25 ====
-x318 gridsquares
-<code bash>
-/global/work/mifapw/emep/Data/EECCA_25/metdata/
-</code>
-  * 2006/ : Basic parameters
-  * 2007/ : Basic parameters
-==== EECCA 10 ====
-x480 gridsquares
-<code bash>
-/global/work/mifapw/emep/Data/EECCA_10/metdata/
-</code>
-  * 2006/ : less than Basic parameters!
-===== IFS =====
-IFS is the current NWP model running operationally at ECMWF. The global fields are described on lon lat coordinates. 2006 is received from UiO, but 2008 has been run on ECMWF recently.
-Parameters 2D:
-^ Parameter Name ^ Unit ^ Validity  ^ Comment ^
-| surface_pressure | Pa | Inst | |
-| temperature_2m | K | Inst | |
-| surface_flux_sensible_heat | W/m² | Inst | |
-| surface_flux_latent_heat | W/m² | Inst | |
-| surface_stress | Pa s | Inst | |
-Parameters 3D:
-^ Parameter Name ^ Unit ^ Validity  ^ Comment ^
-| u_wind | m/s | Inst | staggered |
-| v_wind | m/s | Inst | staggered |
-| specific_humidity | kg/kg | Inst | |
-| potential_temperature | K | Inst | |
-| sigma_dot | 1/s | Inst | |
-| precipitation | mm | Accum | |
-| convective_precipitation | mm | Accum | |
-| 3D_cloudcover | % | Inst | |
-| cloud_liquid_water_content | kg/kg | Inst | |
-| convective_updraft_flux | kg/m²s | Accum | |
-| convective_updraft_detrainment | m/s | Accum | |
-| convective_downdraft_flux | kg/m²s | Accum | |
-| convective_downdraft_detrainment | m/s | Accum | |
-==== GLOBAL ====
-<code bash>
-/global/work/mifapw/emep/Data/GLOBAL/metdata/
-</code>
-/
-===== Hirham =====
-===== Parlam-PS =====
-The EMEP-PPS is a special version of the HIRLAM-3 created in 2000 covering the past EMEP grid (170x133) on a polarsterographic projection. These meteorological input files are both available on a special felt-format specially created as Unified EMEP model input, but has been also converted to NetCDF format (can run Unimod with both input formats).
-Felt format is available from:
-<code bash>
-/global/work/mifapw/emep/Data/EMEP/metdata/
-</code>
-for the following years: 1990, 1995-2006 (+200701)
-The following is describing the files on NetCDF format.
-Parameters 2D:
-^ Parameter Name ^ Unit ^ Validity  ^ Comment ^
-| surface_pressure | Pa | Inst | |
-| temperature_2m | K | Inst | |
-| relative_humidity_2m | % | Inst | |
-| surface_flux_sensible_heat | W/m² | Inst | |
-| surface_flux_latent_heat | W/m² | Inst | |
-| surface_stress | Pa s | Inst | |
-| snow_depth | m | Inst | |
-| soil_water_content | m | Inst | |
-| deep_soil_water_content | m | Inst | |
-| sea_surface_temperature | K | Inst | |
-| fraction_of_ice | % | Inst | |
-Parameters 3D:
-^ Parameter Name ^ Unit ^ Validity  ^ Comment ^
-| u_wind | m/s | Inst | staggered |
-| v_wind | m/s | Inst | staggered |
-| specific_humidity | kg/kg | Inst | |
-| potential_temperature | K | Inst | |
-| sigma_dot | 1/s | Inst | |
-| precipitation | mm | Accum | |
-| 3D_cloudcover | % | Inst | |
-==== EMEP ====
-x133 gridsquares
-<code bash>
-/global/work/mifaab/emep/Data/Parlam-PS/metcdf/
-</code>
-for the following years: 1980, 1985, 1990, 1995-2006